Detail 01
DE2 tuning range: 470.125–529.975 MHz
This system is the DE2-band version of the 3000 Series.
Product detailSKU #1500000318596
Audio-Technica3000 Series (4th Gen) Network Enabled UHF Wireless with BP892xcH-TH MicroSet Omnidirectional Condenser Headworn Microphone Band DE2
1/8
Independent shopping perspective
The Korena take
Audio-Technica's fourth-generation 3000 Series DE2 system pairs the ATW-R3210N network-enabled receiver with an ATW-T3201 body-pack transmitter and BP892xcH-TH omnidirectional headworn microphone. It works across 470.125–529.975 MHz, with receiver scanning, IR synchronization, and a selectable backup frequency for unexpected interference. Wireless Manager software handles network monitoring and control; the network connection does not carry audio. The receiver retains a balanced XLR output, while the metal transmitter uses a locking cH-style four-pin connector and runs on two AA batteries.
Strong match
Who this is for
- Headworn wireless use requiring receiver scanning, IR synchronization, and a quickly selectable backup frequency.
- Installed systems that need network monitoring and control through Audio-Technica Wireless Manager software.
- Open-area wireless operation within the stated typical 300-foot operating range without interfering signals.
Consider the trade-offs
When to look elsewhere
- Systems that require a 1/4-inch receiver audio output.
- Workflows expecting audio to travel over the network connection.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
True-diversity receiving system
The receiver uses true-diversity reception.
Detail 03
Switchable RF output: 10 mW or 30 mW
The transmitter provides selectable low and high RF power settings.
Detail 04
Typical operating range: 100 m (300 feet)
That figure applies in an open environment without interfering signals.
Detail 05
Balanced XLR output
Audio leaves the network-enabled receiver through its balanced XLR connection.
Final check
Know before you order
- 01Two 1.5 V AA batteries are required for the transmitter and are not included.
- 02Network functionality is for Wireless Manager monitoring and control, not network audio.
- 03The stated 300-foot range assumes an open environment with no interfering signals.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What microphone is supplied with this system?
It includes the BP892xcH-TH MicroSet omnidirectional condenser headworn microphone.
02Does the network port send audio?
No. It provides monitoring and control through Audio-Technica Wireless Manager software.
03Does the receiver have a 1/4-inch output?
No. Network-enabled receivers retain the balanced XLR output but do not have a 1/4-inch audio output.
04How is the transmitter powered?
It uses two AA batteries; they are not included.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsOther
- Category Source
- detail
- Tier
- new
- Korena Special
- false
- Source Id
- site51500000318596
Complete your setup
Worth comparing
1 of 12
More from Audio-Technica
1 of 8
