Korena
Product detailSKU #1500000461877

Audio-TechnicaAT-VM510xCB VMx Conical Bonded Phono Cartridge Black/Blue

Audio-Technica logo
Audio-Technica AT-VM510xCB VMx Conical Bonded Phono Cartridge Black/Blue
1/8

Independent shopping perspective

The Korena take

Built for 1/2-inch mount turntables, the AT-VM510xCB is a Dual Moving Magnet cartridge with threaded inserts that mount using two screws. Its PCUHD coils, aluminum cantilever and low-resonance polymer body form the core of the design, while the V-cut stylus protector provides a placement reference at the record. Set tracking force within the specified 1.8–2.2 g range, with 2.0 g listed as standard.

Audio-Technica AT-VM510xCB VMx Conical Bonded Phono Cartridge Black/Blue product detail
Product studyAudio-Technica AT-VM510xCB VMx Conical Bonded Phono Cartridge Black/Blue
Audio-Technica AT-VM510xCB VMx Conical Bonded Phono Cartridge Black/Blue alternate view
Alternate view

Strong match

Who this is for

  • Mounting a Dual Moving Magnet cartridge on a turntable with a 1/2-inch mount.
  • Turntable setups where threaded inserts simplify installation with two mounting screws.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Audio-Technica AT-VM510xCB VMx Conical Bonded Phono Cartridge Black/Blue construction detail

Detail 01

4.5 mV output voltage

The cartridge is specified at 4.5 mV measured at 1 kHz and 5 cm/sec.

Detail 02

20 Hz–25 kHz frequency response

Its stated frequency-response range extends from 20 Hz to 25 kHz.

Detail 03

27 dB channel separation

Channel separation is rated at 27 dB at 1 kHz.

Final check

Know before you order

  1. 01The description identifies a 0.6 mil conical bonded stylus, while the specs identify a 0.3 x 0.7 mil elliptical bonded stylus; confirm the stylus version before ordering.
  2. 02Requires a turntable with a 1/2-inch mount and two screws for installation.
Audio-Technica AT-VM510xCB VMx Conical Bonded Phono Cartridge Black/Blue close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What turntables does it fit?

It is specified for 1/2-inch mount turntables.

02What tracking force is specified?

The range is 1.8–2.2 g, with 2.0 g listed as the standard setting.

03Which replacement styli are compatible?

It accepts AT-VMx Series styli.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsPickups & controls
Pickup Configuration
Paratoroidal, Two Coils Per Channel
1 detailsBody & build
Body Material
Low-Resonance Polymer
4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51500000461877

Worth comparing

More from Audio-Technica