Korena
Product detailSKU #1390836361447

EventideMixingLink Mic Pre With FX Loop

Eventide
Eventide MixingLink Mic Pre With FX Loop
1/8

Independent shopping perspective

The Korena take

MixingLink brings microphone, instrument, and line-level sources into a pedal-based effects setup. Its mic preamp provides up to 65 dB of gain, with switchable phantom power for condenser microphones, while the FX loop handles balanced or unbalanced connections. Send the result to an amplifier, a mixer or recording interface through the XLR DI, or monitor on headphones. A mix control lets you balance dry microphone signal against processed effects.

Eventide MixingLink Mic Pre With FX Loop product detail
Product studyEventide MixingLink Mic Pre With FX Loop
Eventide MixingLink Mic Pre With FX Loop alternate view
Alternate view

Strong match

Who this is for

  • Routing vocals or acoustic instruments through a pedalboard for rehearsal, performance, or recording.
  • Sending a processed signal directly to a mixer or recording interface through the balanced XLR DI.
  • Monitoring a pedalboard-based microphone setup on headphones during recording or silent practice.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Eventide MixingLink Mic Pre With FX Loop construction detail

Detail 01

Up to 65 dB clean gain

Provides the microphone gain range described for integrating dynamic, ribbon, and condenser microphones.

Detail 02

Switchable phantom power

Allows condenser microphones to be used directly with the unit.

Detail 03

Balanced/unbalanced FX loop

The loop can connect balanced or unbalanced effects and studio equipment.

Detail 04

9V DC, 500 mA, center negative

Power supply requirement.

Final check

Know before you order

  1. 01Use a 9V DC, 500 mA center-negative power supply.
  2. 02Choose the appropriate balanced or unbalanced connection for the FX loop.
Eventide MixingLink Mic Pre With FX Loop close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can I run a microphone through pedal effects?

Yes. The built-in mic preamp raises microphone signal for processing through the FX loop and pedals.

02Can it connect directly to a mixer?

Yes. Its balanced XLR DI output can feed a mixer or recording interface.

03Does MixingLink support condenser microphones?

Yes. It has switchable phantom power for condenser microphones.

04Can I feed a guitar amplifier?

Yes. A dedicated amp output is provided for a traditional guitar amplifier.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

5 detailsOther
Category Source
detail
Product Type
Mic preamp and FX loop pedal Model: MixingLink
Tier
new
Korena Special
false
Source Id
site51390836361447

Complete your setup

Worth comparing

More from Eventide