Korena
Product detailSKU #1500000239920

FriedmanASC-10 500W 1x10 Bi-Amp Powered Guitar Cabinet

Friedman
Friedman ASC-10 500W 1x10 Bi-Amp Powered Guitar Cabinet
1/8

Independent shopping perspective

The Korena take

Built for modeler and profiler rigs, the ASC-10 is a 1x10, two-way active stage monitor with 500W of analog bi-amped power in a guitar-cabinet-style enclosure. Place it where an amp normally sits in the backline when you want a conventional cabinet look while using a modeling setup. Its separate LF and HF amplifier sections work with the 10-inch Celestion woofer and compression driver. Rear-panel level, low-cut, and ground-lift controls accompany a balanced 1/4-inch input and balanced XLR link output.

Friedman ASC-10 500W 1x10 Bi-Amp Powered Guitar Cabinet product detail
Product studyFriedman ASC-10 500W 1x10 Bi-Amp Powered Guitar Cabinet
Friedman ASC-10 500W 1x10 Bi-Amp Powered Guitar Cabinet alternate view
Alternate view

Strong match

Who this is for

  • Stage modeler or profiler rigs needing a powered monitor placed in a conventional guitar-amp backline position.
  • Onstage setups needing level adjustment, low-cut filtering, and a ground-lift switch at the monitor.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Friedman ASC-10 500W 1x10 Bi-Amp Powered Guitar Cabinet construction detail

Detail 01

Bi-amped power output

The LF section is specified at 270 Wrms Class G, while the HF section is specified at 80 Wrms Class AB+B.

Detail 02

Speaker system

A Celestion 10-inch TF1025E woofer handles the low-frequency section, with a PETP-film compression driver for high frequencies.

Final check

Know before you order

  1. 01Configured as an active stage monitor for use with modelers and profilers.
  2. 02Its listed connections are a balanced 1/4-inch input and balanced male XLR link output.
Friedman ASC-10 500W 1x10 Bi-Amp Powered Guitar Cabinet close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What type of rig is the ASC-10 made for?

It is configured as a 1x10 two-way active stage monitor for use with modelers and profilers.

02Where can it sit onstage?

It is designed to sit behind you where a traditional guitar amplifier would normally be placed.

03What controls are provided?

The rear panel has a level control, low-cut filter switch, and ground-lift switch.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsPickups & controls
Pickup Configuration
1x10” 2-Way Active Stage Monitor for use with modelers/profilers
4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51500000239920

Worth comparing

More from Friedman