Korena
Product detailSKU #1274034485898

NadyPM-200A Powered Personal Stage Monitor

Nady
Nady PM-200A Powered Personal Stage Monitor
1/8

Independent shopping perspective

The Korena take

A self-powered 5-inch personal monitor with mic and line inputs, three-band EQ and 100W total. For hearing yourself on a small stage.

Nady PM-200A Powered Personal Stage Monitor product detail
Product studyNady PM-200A Powered Personal Stage Monitor
Nady PM-200A Powered Personal Stage Monitor alternate view
Alternate view

Strong match

Who this is for

  • Vocalists needing a dedicated wedge at their own volume
  • Keyboard or guitar players on a crowded small stage
  • Rehearsal rooms where one player needs a separate mix

Consider the trade-offs

When to look elsewhere

  • Drummers or bassists who need low end you can feel
  • Loud full-band stages where 5-inch drivers get buried
  • Anyone wanting in-ear monitoring instead of a wedge

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Nady PM-200A Powered Personal Stage Monitor construction detail

Detail 01

2 x 50W RMS into two internal 5-inch drivers

Enough for personal stage level in a small room. It is a near-field monitor, not front-of-house coverage.

Detail 02

5-inch full-range speakers

Clear on vocals and midrange. Kick drum and bass guitar will not come through with any weight.

Detail 03

XLR mic input plus balanced/unbalanced TRS line input

Take a mic straight in, or a line feed from a mixer, without an extra preamp or DI box.

Detail 04

Three-band EQ, ±12dB at 120Hz / 2.5kHz / 10kHz

Wide 12dB range at each band. The 2.5kHz control is where you cut to kill stage feedback.

Detail 05

Balanced XLR line output

Pass the same signal on to another monitor or back to the board without splitting the source.

Detail 06

Two external 1/4-inch speaker outputs

Drive extra 8-ohm cabinets from the built-in amps to cover a second position on stage.

Detail 07

20Hz–50kHz frequency response

That is the electronics' range, not the drivers'. The 5-inch speakers set the real low-end limit.

Detail 08

Selectable 115V/230V power

A switch, not automatic. Set it to your local voltage before plugging in the first time.

Final check

Know before you order

  1. 01Check the voltage selector matches your outlet before first power-up
  2. 02Mic, cables and stand or mount are not included
  3. 039.6 lb and 11 x 7 x 6 inches — sits on a stand or table
Nady PM-200A Powered Personal Stage Monitor close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can I plug a microphone straight into it?

Yes. It has a balanced XLR mic input, so a dynamic mic goes directly in with no outboard preamp needed.

02Will it work as a drum monitor?

Not well. Two 5-inch drivers will reproduce the snare and cymbals but not the kick weight drummers listen for.

03Can I run a second speaker off it?

Yes. Two 1/4-inch outputs feed external 8-ohm cabinets from the internal 100W of amplification.

04How do I stop it from feeding back?

Pull the 2.5kHz mid control down and keep the monitor behind or beside the mic, off its pickup axis.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51274034485898