Detail 01
DDT circuitry
Distortion Detection Technique is stated to protect drivers and maintain sonic integrity during extreme overload conditions.
Product detailSKU #1378824449369
PeaveyIPR2 3000 Power Amp
1/8
Independent shopping perspective
The Korena take
A lightweight, high-output two-channel power amplifier with Class D efficiency, switchable crossover functions, and protection circuitry for demanding loads and power conditions.
Strong match
Who this is for
- Users needing two-channel power down to 2-ohm loads
- Rigs that benefit from high output in a lightweight amplifier
- Setups needing onboard high-pass or low-pass crossover selection
Consider the trade-offs
When to look elsewhere
- Users needing an amplifier specified only for loads above 2 ohms
- Setups that do not need a two-channel power amplifier
- Users seeking specifications not stated for this model
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2-ohm operation
The amplifier is specified to operate into loads as low as 2 ohms.
Detail 03
Class D with switch-mode power supply
The design is stated to reduce weight while increasing output power, reliability, and thermal efficiency.
Detail 04
Switchable crossover
Each channel has a 100Hz 2nd-order high-pass and 3rd-order low-pass option.
Final check
Know before you order
- 01Confirm your speakers and wiring support the intended load impedance; the minimum specified load is 2 ohms.
- 02Check the stated output figures at your intended impedance and distortion rating.
- 03Verify the listed combo/XLR inputs, XLR thru connections, and twist-lock outputs suit your system.
- 04Allow for fan cooling and confirm the 19-inch rack width and 10.5-inch behind-panel depth fit your installation.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What is the minimum supported load?
The stated minimum load impedance is 2 ohms.
02How much power does it provide at 4 ohms?
With both channels driven at 1kHz, it is rated at 900W per channel at 1% THD, 815W per channel at 0.2% THD, or 950W per channel in a 20ms repetitive burst.
03Does it include crossover controls?
Yes. It has a switchable 100Hz 2nd-order high-pass and 3rd-order low-pass crossover per channel.
04What connections are provided?
It has dual combination 1/4-inch/XLR inputs, dual male XLR input thru connections, and two twist-lock connectors.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsOther
- Category Source
- detail
- Tier
- new
- Korena Special
- false
- Source Id
- site51378824449369
Worth comparing
1 of 12
