Korena
Product detailSKU #1500000396514

QSCLA112 L-Class Powered Line Array

QSC
QSC LA112 L-Class Powered Line Array
1/8

Independent shopping perspective

The Korena take

Built for portable deployments and fixed installs, the QSC LA112 is a powered line-array enclosure with a 12-inch woofer, dual 1.75-inch HF compression drivers, and 2,400W peak Class-D amplification. Its 90° horizontal by 15° vertical dispersion and LEAF waveguide are designed for uniform coverage and extended throw. QSC AWARE, Dante networking, the rear interface, and System Navigator tools provide configuration, processing, monitoring, and control. RapidDeploy rigging supports flown, ground-stacked, or pole-mounted setups.

QSC LA112 L-Class Powered Line Array product detail
Product studyQSC LA112 L-Class Powered Line Array
QSC LA112 L-Class Powered Line Array alternate view
Alternate view

Strong match

Who this is for

  • Portable live productions needing configurable line-array deployment and networked system monitoring.
  • Fixed AV installations requiring powered line-array coverage with Dante networking.
  • Events using flown, ground-stacked, or pole-mounted LA112 deployment configurations.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

QSC LA112 L-Class Powered Line Array construction detail

Detail 01

90° horizontal x 15° vertical dispersion

The coverage pattern is specified as 90° horizontally and 15° vertically.

Detail 02

136 dB maximum SPL

The maximum sound-pressure level is listed as 136 dB.

Detail 03

58 Hz–20 kHz (-6 dB)

This is the stated frequency-response range at -6 dB.

Detail 04

1 XLR input; 1 XLR thru output

The enclosure provides a single XLR input and an XLR thru connection.

Detail 05

2 EtherCON network I/O

Two EtherCON network connections are provided for networking.

Detail 06

47.2 lb; 24.8 x 16.4 x 15.4 inches

Use the listed weight and dimensions when planning transport, mounting, or installation space.

Final check

Know before you order

  1. 01For flown arrays, the source specifies up to six LA112 units with an array frame.
  2. 02For ground stacking, the source specifies up to three LA112 units over one LS118 subwoofer.
  3. 03Confirm the intended deployment—flown, ground-stacked, or pole-mounted—and plan for the listed 47.2 lb weight and dimensions.
QSC LA112 L-Class Powered Line Array close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Is the LA112 powered?

Yes. It is a powered line array with a Class-D amplifier rated at 2,400W peak.

02What inputs and outputs does it have?

It has one XLR input, one XLR thru output, and two EtherCON network I/O connections.

03What drivers are used?

It uses one 12-inch woofer and dual 1.75-inch HF compression drivers.

04Can the LA112 be flown or ground-stacked?

Yes. Its rigging supports flown, ground-stacked, and pole-mounted configurations; up to six may be flown with an array frame, or three ground-stacked over one LS118 subwoofer.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51500000396514

Complete your setup

Worth comparing

More from QSC