Korena
Product detailSKU #1500000285301

Radial EngineeringStageBug SB-4 Compact Active Piezo DI

Radial Engineering
Radial Engineering StageBug SB-4 Compact Active Piezo DI
1/8

Independent shopping perspective

The Korena take

StageBug SB-4 is an active DI built around piezo-equipped instruments. Its 5-megohm input is designed to smooth troublesome piezo peaks and broaden frequency response, while the active buffer balances the signal for PA cable runs up to 100 meters. An XLR output feeds the PA and the auxiliary output can feed a stage amplifier at the same time. On louder stages, use the high-pass filter to reduce excessive low end and the 180° polarity switch to address acoustic hot spots.

Radial Engineering StageBug SB-4 Compact Active Piezo DI product detail
Product studyRadial Engineering StageBug SB-4 Compact Active Piezo DI
Radial Engineering StageBug SB-4 Compact Active Piezo DI alternate view
Alternate view

Strong match

Who this is for

  • Sending a piezo-equipped instrument to a PA while also feeding a stage amplifier.
  • Managing excessive low end or acoustic hot spots during amplified live performances.
  • Running a balanced piezo signal to a PA over cable lengths up to 100 meters.

Consider the trade-offs

When to look elsewhere

  • Setups without 48V phantom power, which the active circuit requires.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Radial Engineering StageBug SB-4 Compact Active Piezo DI construction detail

Detail 01

5 megohm input impedance

It is optimized for piezo pickups and is intended to smooth problematic peaks.

Detail 02

High-pass filter

Reduces excessive bottom end that can contribute to resonance.

Detail 03

180° polarity reverse

Changes the phase relationship between the PA and room acoustics to help reduce acoustic hot spots.

Final check

Know before you order

  1. 01Provide 48V phantom power at the XLR connection.
  2. 02Use it only in dry locations between 5°C and 40°C.
Radial Engineering StageBug SB-4 Compact Active Piezo DI close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Is the SB-4 for piezo pickups?

Yes. It is a piezo-optimized active buffer with a 5-megohm input impedance.

02Can it feed both a PA and stage amplifier?

Yes. It has a standard XLR output for the PA plus an auxiliary output for a stage amplifier.

03How is the SB-4 powered?

It requires 48V phantom power and draws 5mA.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

5 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51500000285301
Prop65
WARNING: This product can expose you to chemicals including Titanium dioxide (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer, and Lead, which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Worth comparing

More from Radial Engineering