Detail 01
Coated film
The white coating warms the tone, shortens sustain slightly, and gives brushes something to grab.

Independent shopping perspective
A 12-inch coated batter head from Remo. For a rack tom that needs a warmer, drier voice and a brush-ready surface.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
The white coating warms the tone, shortens sustain slightly, and gives brushes something to grab.
Detail 02
Sized to a 12-inch shell diameter. Nothing else fits; heads have no adjustment range.
Detail 03
Goes on top, the side you strike. Not intended as a bottom resonant head.
Detail 04
The coating thins where sticks land. Tone dulls over time even before the film dents.
Detail 05
One head for one drum. Matching a three-tom kit means three separate purchases.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
Measure the drum shell's diameter, ignoring the hoop. A 12-inch shell takes a 12-inch head. There is no tolerance either way.
Yes. The coating gives the textured surface brushes need to produce a sweep sound. Clear heads do not.
Top. This is a batter head, made for the side you strike. Resonant bottom heads are a different, thinner product.
When the coating wears through at the strike zone, the head won't hold tuning, or you can feel dents in the film.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.