Korena
Product detailSKU #1308847078114

RODENT2-A Studio Condenser Microphone Bundle

RODE logo
RODE NT2-A Studio Condenser Microphone Bundle
1/8

Independent shopping perspective

The Korena take

A large-diaphragm condenser with switchable pattern, pad and filter, plus stand and cable. For a home studio recording vocals and acoustic instruments.

RODE NT2-A Studio Condenser Microphone Bundle product detail
Product studyRODE NT2-A Studio Condenser Microphone Bundle
RODE NT2-A Studio Condenser Microphone Bundle alternate view
Alternate view

Strong match

Who this is for

  • Tracking vocals in an untreated room using the tighter pattern
  • Recording acoustic guitar, piano or strings in stereo pairs
  • One mic that has to cover voice, room and interview work

Consider the trade-offs

When to look elsewhere

  • Anyone without an interface or mixer supplying phantom power
  • Close-miking loud amps or kick drums as a first choice
  • USB plug-and-play setups with no XLR input

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

RODE NT2-A Studio Condenser Microphone Bundle construction detail

Detail 01

1-inch capsule, side address

You sing into the side badge, not the top. Larger diaphragm gives a fuller, lower-noise sound on voice.

Detail 02

Three polar patterns

Cardioid rejects the room, omni captures it, figure-8 picks up front and back for duets or mid-side.

Detail 03

147dB max SPL

Handles very loud sources without the capsule distorting. Drum overheads and brass are within range.

Detail 04

Needs 48V or 24V phantom power

Won't work plugged into a camera or mixer without phantom. Your interface must supply it and have it switched on.

Detail 05

XLR output, 200 ohm

Balanced connection runs long cable without hum. Requires a mic preamp, not a line or instrument input.

Detail 06

860g body

Heavy enough that a lightweight desk stand will droop. It wants a solid boom with proper counterweight.

Final check

Know before you order

  1. 01Requires an audio interface or mixer with phantom power; that is a separate purchase
  2. 02A pop filter matters more on condensers than dynamics for plosives
  3. 03Side-address means aiming the top of the mic at the source misses it
RODE NT2-A Studio Condenser Microphone Bundle close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Do I need an audio interface for this mic?

Yes. It outputs XLR and requires 48V or 24V phantom power. An interface or mixer with a mic preamp and phantom is required.

02Which side do I sing into?

The side with the badge, not the top end. It is side-address, so face the front grille at mouth height.

03Can I record two people with it?

Yes, using figure-8 for two people facing each other, or omni to capture everyone in the room.

04Is it good for loud sources?

It handles up to 147dB SPL, so guitar cabs, brass and drum overheads are within its range.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsBody & build
Color
Gray
4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51308847078114

Complete your setup

Worth comparing

More from RODE