Detail 01
Long scale
Cut for 34-inch basses. Measure from nut to bridge saddle before ordering; short-scale instruments need a different set.

Independent shopping perspective
Long-scale bass strings in a medium light gauge. For four-string players who want lower tension than a standard set without going slack.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
Cut for 34-inch basses. Measure from nut to bridge saddle before ordering; short-scale instruments need a different set.
Detail 02
Lower tension than a standard set. Easier fretting and bending, slightly softer attack and less low-end push.
Detail 03
Textured winding under the fingers. Brighter and grindier than flats, and harder on frets over time.
Detail 04
Covers E-A-D-G. Nothing here for a low B or high C.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
No. These are cut for long-scale instruments, around 34 inches nut to saddle. On a short-scale bass the silk and taper land in the wrong place at the bridge or nut.
Probably. Going to a lighter gauge drops string tension, which lets the neck pull back a little. Expect to check relief and reset intonation.
Bright. Roundwound bass strings have a pronounced top end and grind when new, then settle warmer as they break in.
Not well. A medium light gauge already runs lower tension at standard pitch, so tuning down leaves the low string loose and rattly.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.