Korena
Product detailSKU #1274034493400

Seymour DuncanSTK-S9 Hot Stack Plus - Bridge Pickup White Bridge

Seymour Duncan
Seymour Duncan STK-S9 Hot Stack Plus - Bridge Pickup White Bridge
1/8

Independent shopping perspective

The Korena take

Stacked humbucker in a single-coil size for the bridge position. High output and hum-free, for Strat players who want more push without routing.

Seymour Duncan STK-S9 Hot Stack Plus - Bridge Pickup White Bridge product detail
Product studySeymour Duncan STK-S9 Hot Stack Plus - Bridge Pickup White Bridge
Seymour Duncan STK-S9 Hot Stack Plus - Bridge Pickup White Bridge alternate view
Alternate view

Strong match

Who this is for

  • Strat bridge slots that hum badly under stage lighting or near screens
  • Players wanting humbucker-level drive from a single-coil-sized route
  • Coil-split and series/parallel wiring via the 3-conductor cable

Consider the trade-offs

When to look elsewhere

  • Players chasing traditional glassy vintage Strat bridge chime
  • Anyone wanting a low-output pickup that cleans up easily
  • Guitars with a full humbucker route — a real humbucker fits better

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Seymour Duncan STK-S9 Hot Stack Plus - Bridge Pickup White Bridge construction detail

Detail 01

20.26k DC resistance

Very high, but that's normal for a stacked design — two coils in series. Real-world output is hot, not extreme.

Detail 02

3.23kHz resonant peak

Low peak. Top end is rolled off compared with a vintage single-coil, so it reads thick rather than glassy.

Detail 03

Stacked coil design

Second coil sits under the first to cancel hum while keeping single-coil dimensions. No pickguard or body routing needed.

Detail 04

Alnico V rod magnets

Stronger magnets give firmer attack and more upper-midrange bite than Alnico II would.

Detail 05

3-conductor shielded cable

Four usable leads let you wire series, parallel or split. More tones, but more complex wiring than a two-wire pickup.

Detail 06

EQ 5/7/4 bass/mid/treble

Midrange forward, treble pulled back. Cuts through a band mix rather than sitting glassy on top.

Final check

Know before you order

  1. 01Pickup only — no pickguard, pots, or switch included.
  2. 023-conductor wiring needs a diagram; get one before you start soldering.
  3. 03Bridge-position wind. Pair with matching neck and middle pickups or output will be lopsided.
Seymour Duncan STK-S9 Hot Stack Plus - Bridge Pickup White Bridge close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Will this fit a standard Strat pickguard?

Yes. It uses standard single-coil dimensions, so it drops into a normal Strat bridge slot without routing the body or modifying the pickguard.

02Does it really eliminate hum?

Yes. The stacked second coil cancels hum the way a humbucker does, while keeping the single-coil footprint.

03Why is the DC resistance so high?

Stacked pickups put two coils in series, so the reading adds up. It does not mean the pickup is twice as loud as a 10k single-coil.

04Can I split it to a single coil?

The 3-conductor shielded cable gives you the leads for splitting or parallel wiring. You will need a push-pull pot or extra switch to control it.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51274034493400