Korena
Product detailSKU #1274034493996

ShureMX393/O Low Profile Boundary Mic Cardioid

Shure logo
Shure MX393/O Low Profile Boundary Mic Cardioid
1/8

Independent shopping perspective

The Korena take

Boundary mic for conference tables, lecterns and altars. Sits flat on the surface and picks up talkers seated around it. Needs phantom power.

Shure MX393/O Low Profile Boundary Mic Cardioid product detail
Product studyShure MX393/O Low Profile Boundary Mic Cardioid
Shure MX393/O Low Profile Boundary Mic Cardioid alternate view
Alternate view

Strong match

Who this is for

  • Conference room tables where a mic stand would block sightlines
  • Fixed installs feeding a mixer with 48V phantom
  • Courtrooms, council chambers, boardrooms with several seated talkers

Consider the trade-offs

When to look elsewhere

  • Recording music — 50 Hz to 17 kHz drops the low end
  • Anyone needing plug-and-play USB into a laptop
  • Handheld or stand-mounted use of any kind

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Shure MX393/O Low Profile Boundary Mic Cardioid construction detail

Detail 01

Omnidirectional pattern

Picks up evenly all around, so one mic covers talkers on both sides of a table. Also picks up more room noise.

Detail 02

50 Hz to 17 kHz response

Tuned for speech. Rolled off low end keeps HVAC rumble and table thumps out of the signal.

Detail 03

11 to 52 Vdc phantom, 2.0 mA

Runs off any standard mixer or interface phantom supply. No battery, no separate power brick.

Detail 04

45 dB minimum common mode rejection

Balanced output rejects hum picked up on long cable runs through a building. Matters for permanent installs.

Detail 05

50 dB switch attenuation

The mute switch actually kills the signal rather than just dropping it, so no bleed when muted.

Detail 06

17.5 dB A-weighted self noise

Quiet enough that the mic itself won't be audible under a talker in a quiet room.

Final check

Know before you order

  1. 01Needs a phantom-powered mixer or interface — no phantom, no signal
  2. 02Low profile means it must sit on a hard flat surface to work
  3. 03Confirm the cable exit and mounting suit your table before drilling
Shure MX393/O Low Profile Boundary Mic Cardioid close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Does this need phantom power?

Yes. It runs on 11 to 52 volts phantom and draws 2.0 mA. Any standard mixer or audio interface with 48V will power it.

02How many people can one mic cover?

The omnidirectional pattern picks up evenly in all directions, so a single unit covers talkers seated around it on a table rather than one seat.

03Can I use it for recording vocals or instruments?

It's built for speech. Response stops at 50 Hz on the bottom, so low-end on voice and instruments won't be captured fully.

04Will it work outdoors or in a hot room?

It's rated from 0 to 135 degrees F and up to 95% relative humidity, so heat and humidity are handled. There's no weatherproofing for rain.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsBody & build
Color
Black
4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51274034493996

Complete your setup

Worth comparing

More from Shure