Korena
Product detailSKU #1500000481069

StrymonPCH X2 Stereo Active DI Isolator

Strymon
Strymon PCH X2 Stereo Active DI Isolator
1/8

Independent shopping perspective

The Korena take

PCH-X2 puts two independent, transformer-isolated active DI channels in one compact enclosure for stereo instruments, modelers, and other dual-output rigs. Each channel accepts a 1/4-inch input, sends a balanced XLR output, and provides a non-buffered Thru connection for an additional amp or monitor feed. The Sum switch combines left and right at the left output when a mono destination is required. Per-channel ground lifts and selectable high-pass filters handle routing choices, while a left-output phase switch addresses polarity adjustments. It runs on 48V phantom power per channel.

Strymon PCH X2 Stereo Active DI Isolator product detail
Product studyStrymon PCH X2 Stereo Active DI Isolator
Strymon PCH X2 Stereo Active DI Isolator alternate view
Alternate view

Strong match

Who this is for

  • Sending stereo keyboards, pedalboards, or modelers to balanced XLR inputs at front of house.
  • Combining left and right inputs at the left output for a mono destination without repatching.
  • Feeding an amplifier or monitor through Thru outputs while also sending balanced signals to a mixer.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Strymon PCH X2 Stereo Active DI Isolator construction detail

Detail 01

Dual custom audio transformers

Each of the two channels has its own custom transformer for galvanic isolation.

Detail 02

Sum switch

It merges the left and right inputs and sends the result to the left output.

Detail 03

High-pass filter: Off, 80Hz, 240Hz per channel

Each channel can be left full-range or set to either listed cutoff.

Detail 04

Ground lift per channel

Each channel has its own ground-lift switch for reducing hum.

Detail 05

Phase switch on left XLR output

Polarity can be reversed on the left output.

Detail 06

3 mm extruded aluminum chassis with 5 mm ribs

The enclosure uses extruded aluminum and reinforced ribs, with an awning-style protective design.

Final check

Know before you order

  1. 01The unit requires standard 48V phantom power for each channel.
  2. 02It provides two 1/4-inch inputs, two XLR outputs, and two non-buffered 1/4-inch Thru outputs.
Strymon PCH X2 Stereo Active DI Isolator close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can it turn a stereo source into a mono feed?

Yes. Its Sum switch combines left and right inputs and routes them to the left output.

02Does each channel have a ground lift?

Yes. Ground-lift switching is available separately on both channels.

03Can I feed an amp and a mixer at the same time?

Yes. Each channel has a non-buffered Thru output alongside its balanced XLR output.

04What powers the PCH-X2?

It uses 48V phantom power, with 5 mA consumption per channel.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

5 detailsOther
Category Source
detail
Product Type
Active direct box
Tier
new
Korena Special
false
Source Id
site51500000481069