Korena
Product detailSKU #1273887986823

ACCU CABLE3-Pin DMX Lighting Cable 50 ft.

ACCU CABLE
ACCU CABLE 3-Pin DMX Lighting Cable 50 ft.
1/8

Independent shopping perspective

The Korena take

A 50-foot 3-pin DMX cable for running control signal between lighting fixtures. Buy it if your run outgrew the short cables that came in the box.

ACCU CABLE 3-Pin DMX Lighting Cable 50 ft. product detail
Product studyACCU CABLE 3-Pin DMX Lighting Cable 50 ft.
ACCU CABLE 3-Pin DMX Lighting Cable 50 ft. alternate view
Alternate view

Strong match

Who this is for

  • Long throws from controller to fixtures across a stage or room
  • Mobile DJ rigs where truss and console sit far apart
  • Keeping one clean run instead of chaining several short cables

Consider the trade-offs

When to look elsewhere

  • Fixtures with 5-pin DMX inputs, unless you add an adapter
  • Microphone runs — this is data cable, not audio cable
  • Short hops between adjacent fixtures; 50 feet becomes clutter

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

ACCU CABLE 3-Pin DMX Lighting Cable 50 ft. construction detail

Detail 01

3-pin connector

Matches the 3-pin DMX in and out on most entry-level fixtures. Anything with 5-pin sockets needs an adapter.

Detail 02

50 ft length

Covers front-of-house to stage on most small gigs. Coil the slack in a figure-eight rather than stretching it tight.

Detail 03

DMX data cable

Built to carry lighting control over distance. Its impedance keeps the signal clean on runs where mic cable gets flaky.

Detail 04

Black jacket

Blends into dark floors and truss, which also means it is easy to miss during a low-light teardown.

Detail 05

About $32

Cheaper than two shorter cables plus a coupler, and one continuous run means one less connection to fail.

Final check

Know before you order

  1. 01One cable only — you need a run for every fixture in the chain
  2. 02Check whether your fixtures take 3-pin or 5-pin DMX first
  3. 03A terminator on the last fixture prevents flicker on long chains
ACCU CABLE 3-Pin DMX Lighting Cable 50 ft. close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can I use this as a microphone cable?

The connector will fit an XLR input, but this is data cable. Keep it for DMX and use mic cable for microphones.

02Does it work with 5-pin DMX fixtures?

Not directly. You need a 3-pin to 5-pin adapter, which is sold separately.

03Is 50 feet too long for a small setup?

It works, but you will be coiling slack every night. If the controller sits within a few feet of the fixtures, a shorter cable is tidier.

04How many fixtures can I daisy-chain?

A DMX chain handles up to 32 devices. Total cable length matters more than the count — terminate the last fixture on long runs.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsBody & build
Color
Black
5 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51273887986823
Prop65
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Worth comparing

More from ACCU CABLE