Detail 01
Typical operating range: 300 ft / 100 m
The stated range applies to an open environment with no interfering signals.
Product detailSKU #1500000318653
Audio-Technica3000 Series (4th Gen) Network Enabled UHF Wireless with ATW-C710 Cardioid Dynamic Microphone Capsule Band EE1
1/8
Independent shopping perspective
The Korena take
Configured for the EE1 band, this fourth-generation 3000 Series system combines the ATW-R3210N network-enabled receiver with an ATW-T3202 handheld transmitter and ATW-C710 capsule. The receiver can scan and select frequencies, then transfer the choice to the transmitter through IR sync. A backup frequency can be assigned and recalled from the transmitter when interference appears. Network access is for monitoring and control in A-T Wireless Manager software, while audio leaves the receiver through its balanced XLR output.
Strong match
Who this is for
- Wireless microphone setups that need receiver monitoring and control through A-T Wireless Manager software.
- Performance situations where a preset backup frequency can be selected when interference occurs.
- EE1-band operation across 530.000–589.975 MHz with receiver-based frequency scanning.
Consider the trade-offs
When to look elsewhere
- Systems requiring a 1/4-inch audio output from the network-enabled receiver.
- Applications expecting audio to travel over the system’s network connection.
- Operation outside the EE1 530.000–589.975 MHz frequency band.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
True-diversity receiving system
The receiver is specified as true diversity.
Detail 03
Switchable RF output: 10 mW or 30 mW
The transmitter offers two listed RF power settings.
Detail 04
Two AA batteries
The handheld transmitter uses two AA batteries; batteries are not included.
Detail 05
AT8631 joining plate
A joining plate is included with the network-enabled system.
Final check
Know before you order
- 01Use the EE1 frequency band: 530.000–589.975 MHz.
- 02Plan for a balanced XLR receiver connection; this network-enabled version has no 1/4-inch audio output.
- 03The network port supports monitoring and control, not network audio.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What frequency range does the EE1 version use?
The EE1 band covers 530.000 to 589.975 MHz.
02Can I manage it over a network?
Yes. The network-enabled receiver supports monitoring and control through A-T Wireless Manager software; it does not carry network audio.
03How are transmitter frequencies set?
Scan and select a frequency on the receiver, then use IR sync to transfer it to the transmitter.
04Are batteries included?
No. The transmitter requires two 1.5V AA batteries, which are not included.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsOther
- Category Source
- detail
- Tier
- new
- Korena Special
- false
- Source Id
- site51500000318653
Complete your setup
Worth comparing
1 of 12
More from Audio-Technica
1 of 8
