Korena
Product detailSKU #1273887988968

Audio-TechnicaAT4050ST Stereo Condenser Microphone

Audio-Technica logo
Audio-Technica AT4050ST Stereo Condenser Microphone
1/8

Independent shopping perspective

The Korena take

A single-point stereo condenser with switchable width and true mid-side output. For engineers recording rooms, ensembles, drum overheads or ambience to two tracks.

Audio-Technica AT4050ST Stereo Condenser Microphone product detail
Product studyAudio-Technica AT4050ST Stereo Condenser Microphone
Audio-Technica AT4050ST Stereo Condenser Microphone alternate view
Alternate view

Strong match

Who this is for

  • Capturing a room, choir or ensemble from one stand position
  • Drum overheads where you want a locked stereo image
  • Location and film ambience that must stay mono-compatible

Consider the trade-offs

When to look elsewhere

  • Anyone with a single preamp channel — it needs two
  • Handheld or live vocal duty at 517 grams
  • Simple mono podcast or voiceover setups

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Audio-Technica AT4050ST Stereo Condenser Microphone construction detail

Detail 01

90° / 127° / M-S switch

Two fixed stereo widths, or raw mid-side out so you set width later in the mix instead of at the session.

Detail 02

Cardioid and figure-of-eight capsules

Mid capsule aims forward, side capsule picks up left and right. Collapse to mono cleanly, which spaced pairs often will not.

Detail 03

5-pin XLR output, supplied 16.5 ft breakout cable

One cable off the mic splits to two 3-pin XLRs. Both channels ride together, so you need two inputs at the desk.

Detail 04

48V, 6.4 mA total draw

Higher current than a typical single condenser. Cheap phantom supplies and some multi-channel mixers sag when every channel is loaded.

Detail 05

149 dB max SPL, 10 dB pad

Handles drum kits and brass up close. Engage the pad before the preamp rather than after clipping the capsule.

Detail 06

80 Hz roll-off, 12 dB/octave

Trims floor rumble and HVAC at the mic. Useful on a boom or a stand sitting on a live wooden floor.

Final check

Know before you order

  1. 01You need two preamp channels with 48V and two record tracks
  2. 02M-S mode needs a decoder or matrix plugin in your DAW
  3. 03Budget a heavy stand and boom; 517 grams droops on light hardware
Audio-Technica AT4050ST Stereo Condenser Microphone close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can I use it as a mono microphone?

Yes. In M-S mode the mid channel alone is a standard cardioid signal. Record just that channel and ignore the side output.

02What is the difference between the 90 and 127 degree settings?

Both are internally decoded stereo. 90 degrees gives a tighter, more focused image; 127 degrees spreads wider. 127 is also the more sensitive of the two.

03Do I have to use the supplied cable?

Yes. The mic body has an integral 5-pin XLR, so it needs that 8-conductor breakout to reach two 3-pin inputs. Standard mic cable will not fit.

04Will it work on battery or USB power?

No. It is an externally polarized condenser and requires 48V phantom power from an interface, preamp or mixer.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

5 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51273887988968
Prop65
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

Complete your setup

Worth comparing

More from Audio-Technica