Korena
Product detailSKU #1303337805192

AudixMB5055 MicroBoom-50 With M1255B Microphone Hypercardioid

Audix logo
Audix MB5055 MicroBoom-50 With M1255B Microphone Hypercardioid
1/8

Independent shopping perspective

The Korena take

A 50-inch carbon fiber boom with a miniaturized hypercardioid condenser, for tight overhead pickup where stage monitors and room sound need rejecting.

Audix MB5055 MicroBoom-50 With M1255B Microphone Hypercardioid product detail
Product studyAudix MB5055 MicroBoom-50 With M1255B Microphone Hypercardioid
Audix MB5055 MicroBoom-50 With M1255B Microphone Hypercardioid alternate view
Alternate view

Strong match

Who this is for

  • Choir or ensemble miking on a loud stage with wedges
  • Theater pickup where you need to narrow onto one group
  • Rooms with reflective walls that muddy a wider pattern

Consider the trade-offs

When to look elsewhere

  • Covering a wide section from a single boom
  • Anyone without 18-52V phantom power at the input
  • Sources that move around under the capsule

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Audix MB5055 MicroBoom-50 With M1255B Microphone Hypercardioid construction detail

Detail 01

Hypercardioid pattern

Narrower front lobe than cardioid with a small rear lobe. More gain before feedback, but aim is less forgiving.

Detail 02

50-inch carbon fiber rod, .20 inch diameter

Thin enough to read as a line, not a mic. Gets the capsule over a group without a boom arm in frame.

Detail 03

130dB max SPL, 109dB dynamic range

Handles a full choir or brass section peaking close by without the capsule folding over.

Detail 04

21dB self-noise, 73dB S/N

Quiet enough for distant miking, where you run high gain and the preamp hears everything.

Detail 05

50Hz-19kHz response

Rolls off below 50Hz, which keeps stage rumble and HVAC out of a mic hung in open air.

Detail 06

Mini-XLR at both ends

Capsule and boom detach. Cable runs are mini-XLR, not standard XLR, so plan the connection to your mixer.

Final check

Know before you order

  1. 01Requires 18-52V phantom power from the mixer or interface
  2. 02You'll need a stand or mount rated for a 50-inch boom
  3. 03Hypercardioid has a rear lobe — keep wedges out of the back
Audix MB5055 MicroBoom-50 With M1255B Microphone Hypercardioid close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Why pick hypercardioid over the cardioid version?

It rejects more from the sides, so you get more gain before feedback on a loud stage. The trade is a narrower pickup area that needs careful aiming.

02Does it need phantom power?

Yes, 18-52V from your mixer or interface. The condenser capsule will not pass signal without it.

03Will it cover a whole choir?

One boom covers a narrower slice than the cardioid version. Wide groups usually need more than one, spaced across the front.

04What connectors does it use?

3-pin mini-XLR, male at the bottom of the boom and female at the top for the capsule. Not standard full-size XLR.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

2 detailsBody & build
Color
Black
Color Finish
Powder coat
4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51303337805192

Complete your setup

Worth comparing

More from Audix