Korena
Product detailSKU #1500000458228

AxLabs3-Way Toggle Switch 4-pole Nickel

AxLabs
AxLabs 3-Way Toggle Switch 4-pole Nickel
1/8

Independent shopping perspective

The Korena take

The nickel AxLabs 3-way, 4-pole toggle switch is intended for electric-guitar electronics and other audio-equipment projects. A steel tin-plated frame, zinc die-cast bushing, and brass nickel-plated shaft make up its hardware, with Bakelite insulation and nickel-silver contacts in the switch construction. An ABS knob handles operation. It carries a 20 milliohms maximum contact-resistance specification and is rated for 3A, 300W maximum on non-inductive AC loads.

AxLabs 3-Way Toggle Switch 4-pole Nickel product detail
Product studyAxLabs 3-Way Toggle Switch 4-pole Nickel
AxLabs 3-Way Toggle Switch 4-pole Nickel alternate view
Alternate view

Strong match

Who this is for

  • Replacing or building a three-way, four-pole switching section in an electric-guitar electronics project.
  • Audio-equipment projects requiring a switch with a 3A, 300W maximum non-inductive AC contact rating.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

AxLabs 3-Way Toggle Switch 4-pole Nickel construction detail

Detail 01

20 milliohms maximum contact resistance

Sets the stated maximum contact-resistance value.

Detail 02

250VDC dielectric strength

The switch is specified with 250VDC dielectric strength.

Detail 03

1000 megaohms or greater leakage resistance

The listed leakage-resistance figure is 1000 megaohms or higher.

Detail 04

RoHS compliant

Meets the listed RoHS product standard.

Final check

Know before you order

  1. 01Confirm that your project calls for a 3-way, 4-pole toggle switch.
  2. 02Confirm the circuit stays within the stated 3A, 300W maximum non-inductive AC contact rating.
AxLabs 3-Way Toggle Switch 4-pole Nickel close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What finish is this toggle switch?

It is nickel.

02What kind of switch is it?

It is a 3-way, 4-pole toggle switch.

03What is the contact rating?

The stated rating is 3A and 300W maximum for a non-inductive AC load.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51500000458228

Worth comparing

More from AxLabs