Detail 01
250K resistance
Bleeds a little more treble to ground than 500K. This is the standard value for single-coil guitars — warmer, less bite.

Independent shopping perspective
A 250K split-shaft potentiometer from Fender. Replacement volume or tone pot for a guitar with single-coils, for anyone doing their own wiring repairs.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
Bleeds a little more treble to ground than 500K. This is the standard value for single-coil guitars — warmer, less bite.
Detail 02
The shaft is slotted, so it takes push-on knobs. Set-screw knobs meant for solid shafts won't grip properly.
Detail 03
Cheap enough to buy two or three at once. Pots fail one at a time, and shipping one part costs the same as three.
Detail 04
One control. A full Strat harness needs three, plus a switch and capacitor, bought separately.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
250K is the standard value for single-coil pickups. It rolls off slightly more high end than 500K, which is why humbucker guitars usually use the higher value.
Push-on knobs made for split shafts will. Knobs with a set screw are designed for solid shafts and tend to slip on a slotted one.
Either. The same pot works in both positions — the wiring determines the function, not the part.
No. It's the pot alone. You supply the wire, capacitor, and solder.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.