Korena
Product detailSKU #1303152053135

FenderNo-Load 250K Solid Shaft Potentiomenter

Fender logo
Fender No-Load 250K Solid Shaft Potentiomenter
1/8

Independent shopping perspective

The Korena take

250K no-load solid-shaft potentiometer for guitar or bass tone circuits. For players who want a fully transparent tone control at maximum setting.

Fender No-Load 250K Solid Shaft Potentiomenter product detail
Product studyFender No-Load 250K Solid Shaft Potentiomenter
Fender No-Load 250K Solid Shaft Potentiomenter alternate view
Alternate view

Strong match

Who this is for

  • Replacing a stock tone pot to get more top end wide open
  • Single-coil guitars where treble loss at full tone is noticeable
  • Repair work on an instrument with a scratchy or failed tone pot

Consider the trade-offs

When to look elsewhere

  • Volume duty — the no-load taper is built for tone circuits
  • Split-shaft knobs, which need a knurled shaft, not a solid one
  • Anyone unwilling to solder or pay a tech to install it

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Fender No-Load 250K Solid Shaft Potentiomenter construction detail

Detail 01

No-load design

At maximum, the pot disconnects from the circuit entirely, so the tone cap stops loading the pickups and treble comes back.

Detail 02

250K resistance

Standard value for single coils. Pairing it with humbuckers, which usually want 500K, will sound darker than intended.

Detail 03

Solid shaft

Takes set-screw knobs. Push-on split-shaft knobs from Strat-style guitars will not grip it.

Detail 04

Detent at full rotation

You feel a click at the no-load point, so you know when the tone control is out of the circuit without looking.

Final check

Know before you order

  1. 01Solder, wire, and a soldering iron are needed — nothing is included beyond the pot
  2. 02Check your knob type: solid shaft needs set-screw knobs, not push-on
  3. 03Measure your control cavity depth; some thin bodies restrict pot height
Fender No-Load 250K Solid Shaft Potentiomenter close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What does no-load actually do?

Turned fully up, it removes itself from the circuit. Your pickups see no tone-control load at all, which brings back highs a standard pot bleeds off.

02Can I use this as a volume pot?

It is made for tone. As a volume control the no-load step at the top of the sweep works against you rather than for you.

03Will it work with humbuckers?

It will function, but 250K loads humbuckers more than the usual 500K and darkens them. Most humbucker guitars want a 500K pot.

04Do my current knobs fit?

Only if they tighten with a set screw. Split-shaft push-on knobs need a knurled shaft and will slip on this one.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

5 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51303152053135
Prop65
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

Worth comparing

More from Fender