Korena
Product detailSKU #1274115036779

K&M15262 Soprano Recorder and Piccolo 6.5 mm Stand 6 mm Peg

K&M
K&M 15262 Soprano Recorder and Piccolo 6.5 mm Stand 6 mm Peg
1/8

Independent shopping perspective

The Korena take

Small folding peg stand for a soprano recorder or piccolo. Fits in a pocket, holds one instrument between pieces.

K&M 15262 Soprano Recorder and Piccolo 6.5 mm Stand 6 mm Peg product detail
Product studyK&M 15262 Soprano Recorder and Piccolo 6.5 mm Stand 6 mm Peg
K&M 15262 Soprano Recorder and Piccolo 6.5 mm Stand 6 mm Peg alternate view
Alternate view

Strong match

Who this is for

  • Recorder or piccolo players needing somewhere to set the instrument down
  • Doubling players switching instruments mid-set
  • Gigging in tight spaces where a full stand won't fit

Consider the trade-offs

When to look elsewhere

  • Alto or tenor recorders and flutes — the peg is sized for smaller bores
  • Anyone wanting long-term storage; this is a between-pieces rest
  • Players needing to hold more than one instrument at a time

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

K&M 15262 Soprano Recorder and Piccolo 6.5 mm Stand 6 mm Peg construction detail

Detail 01

6.5 mm peg / 6 mm peg

The peg diameter has to match your instrument's bore. Too wide won't enter; too narrow lets the instrument wobble.

Detail 02

Zinc die-cast legs

Metal base gives it weight low down, so a top-heavy piccolo is less likely to tip it.

Detail 03

0.18 lb weight

Light enough to live in a case pocket permanently. You won't leave it at home to save space.

Detail 04

5.71 inch / 145 mm height

Low profile. The instrument sits close to the floor or tabletop, out of the way of music stands.

Detail 05

Screw-attachable leg base

The legs unscrew and store into the peg itself, so there's nothing loose to lose in a bag.

Final check

Know before you order

  1. 01Measure your instrument's bore against the 6.5 mm and 6 mm peg before ordering
  2. 02Holds one instrument only — doublers need a stand per horn
  3. 03Plastic peg contacts the bore; check fit before leaving it unattended
K&M 15262 Soprano Recorder and Piccolo 6.5 mm Stand 6 mm Peg close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Will this hold an alto recorder?

No. The peg is sized for soprano recorder and piccolo bores. A larger recorder needs a stand with a wider peg.

02Is it stable enough for a piccolo?

The zinc die-cast legs put the weight at the base, which helps with a top-heavy instrument. On an uneven or bumped surface, treat any small peg stand with care.

03How small does it pack down?

The legs screw into the peg for storage and the whole thing weighs 0.18 lb, so it fits in a pocket or case compartment.

04Can I leave my instrument on it during a whole rehearsal?

It's built as a rest between pieces. For longer periods, the case is the safer place, especially with wooden instruments.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsBody & build
Color
Black
4 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51274115036779

Worth comparing

More from K&M