Korena
Product detailSKU #1275776904091

SchilkeStandard Series Cornet Mouthpiece Group II in Silver 17D4 Silver

Schilke
Schilke Standard Series Cornet Mouthpiece Group II in Silver 17D4 Silver
1/8

Independent shopping perspective

The Korena take

Silver-plated Schilke 17D4 cornet mouthpiece: .682-inch cup with a deep D cup and semi-flat rim, chosen mainly for endurance on long playing days.

Schilke Standard Series Cornet Mouthpiece Group II in Silver 17D4 Silver product detail
Product studySchilke Standard Series Cornet Mouthpiece Group II in Silver 17D4 Silver
Schilke Standard Series Cornet Mouthpiece Group II in Silver 17D4 Silver alternate view
Alternate view

Strong match

Who this is for

  • Cornet players in brass band or concert band programs
  • Long rehearsals and services where lip endurance is the limit
  • Players wanting a fuller cup than the shallow A and B models

Consider the trade-offs

When to look elsewhere

  • Lead and commercial high-register work; the shallow 15A4 suits that
  • Small-diameter preferences, since .682 sits in the medium-large range
  • Trumpet players, unless the horn takes a cornet shank

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Schilke Standard Series Cornet Mouthpiece Group II in Silver 17D4 Silver construction detail

Detail 01

.682 inch (17.33mm) cup diameter

Medium-large in this group, sitting between the .674 model 15 and the .720 model 24.

Detail 02

Deeper D cup

More cup volume than the B and C cups in the same diameter, which is the main change in feel versus a 17B4.

Detail 03

Number 4 semi-flat rim

Flatter contact patch than the rounded rims, which is what Schilke ties to improved endurance.

Detail 04

26 throat

The standard throat across most of this group, so switching within the series changes rim and cup, not airflow.

Detail 05

Standard backbore

The 17D4D is the same cup with a larger backbore, so this version blows tighter of the two.

Detail 06

Cornet shank

Shorter, narrower taper than a trumpet mouthpiece. It will not seat correctly in a trumpet receiver.

Final check

Know before you order

  1. 01Cornet receiver only; a trumpet needs the trumpet-shank version
  2. 02Single mouthpiece, no pouch or case included
  3. 03Switching rim contour mid-season can unsettle a set embouchure
Schilke Standard Series Cornet Mouthpiece Group II in Silver 17D4 Silver close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Will this fit my trumpet?

No. This is a cornet-shank mouthpiece with a shorter, narrower taper. It will not seat properly in a trumpet receiver.

02What does the 4 in 17D4 mean?

It is the rim number. Number 4 is the semi-flat rim, which Schilke lists for increased endurance compared with the rounder contours.

03How is the 17D4 different from the 17D4D?

Same .682-inch cup and D cup depth. The 17D4D adds a larger backbore, so it blows more openly and takes more air.

04Is this a good step up from a stock mouthpiece?

It is a medium-large .682-inch cup with a deep D cup. If your stock piece is smaller and shallower, expect a fuller feel and more air required.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

5 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51275776904091
Prop65
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Worth comparing

More from Schilke