Korena
Product detailSKU #1274115064864

Sound Percussion LabsSPC13 Hi-Hat Seat Felts 2-Pack

Sound Percussion Labs
Sound Percussion Labs SPC13 Hi-Hat Seat Felts 2-Pack
1/8

Independent shopping perspective

The Korena take

Two replacement felts for a hi-hat clutch and cymbal seat. Consumable parts that wear out and get lost.

Sound Percussion Labs SPC13 Hi-Hat Seat Felts 2-Pack product detail
Product studySound Percussion Labs SPC13 Hi-Hat Seat Felts 2-Pack
Sound Percussion Labs SPC13 Hi-Hat Seat Felts 2-Pack alternate view
Alternate view

Strong match

Who this is for

  • Replacing crushed or missing felts on a hi-hat clutch
  • Restoring clean chick sound on a used hi-hat stand
  • Stocking spares in a hardware bag

Consider the trade-offs

When to look elsewhere

  • Cymbal stands needing full-size sleeve and washer sets
  • Anyone needing thick felts for heavier cymbal muting
  • Players wanting a specific felt density for feel tuning

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Sound Percussion Labs SPC13 Hi-Hat Seat Felts 2-Pack construction detail

Detail 01

2-pack

Covers the top and bottom clutch positions on one hi-hat, or one felt plus a spare.

Detail 02

Hi-hat seat felt

Sits under the top hat inside the clutch. Controls how freely the top cymbal moves and sounds.

Detail 03

Felt material

Cushions metal-on-metal contact. Prevents keyhole wear on the cymbal hole and dampens unwanted ring.

Detail 04

Budget tier

Standard consumable. Compressed felts sound choked and let cymbals rattle against hardware.

Final check

Know before you order

  1. 01Check felt hole size against your clutch rod diameter before ordering
  2. 02Clutch, wing nuts and washers are not included
  3. 03Compressed or oil-soaked old felts should be replaced together, not one at a time
Sound Percussion Labs SPC13 Hi-Hat Seat Felts 2-Pack close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Will these fit any hi-hat stand?

They fit standard hi-hat clutch rods. Check your clutch rod diameter against the felt hole if you have older or non-standard hardware.

02Can I use these on a cymbal stand?

Only if the diameter matches your stand's tilter. Hi-hat seat felts are typically sized for clutch rods, not full cymbal stand tubes.

03How often do hi-hat felts need replacing?

When they compress flat, tear, or soak up oil. Playing time varies, but a gigging player may replace them yearly.

04Does felt thickness change the sound?

Yes. Thicker or softer felt lets the top hat move more freely and sustain longer. Compressed felt chokes the cymbal.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

5 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51274115064864
Prop65
WARNING: This product can expose you to chemicals including 4,4'-Methylenedianiline, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov