Korena
Product detailSKU #1274115065152

Sound Percussion LabsSPC14 Hi-Hat Clutch Felts 4-Pack

Sound Percussion Labs
Sound Percussion Labs SPC14 Hi-Hat Clutch Felts 4-Pack
1/8

Independent shopping perspective

The Korena take

Replacement felts for hi-hat clutches, four to a pack. Buy if your top hat rattles, chokes, or the felt has compressed flat.

Sound Percussion Labs SPC14 Hi-Hat Clutch Felts 4-Pack product detail
Product studySound Percussion Labs SPC14 Hi-Hat Clutch Felts 4-Pack
Sound Percussion Labs SPC14 Hi-Hat Clutch Felts 4-Pack alternate view
Alternate view

Strong match

Who this is for

  • Drummers whose clutch felts have compressed and stopped seating the hat
  • Keeping spares in the stick bag for gig-night failures
  • Restoring loose feel on a used kit with worn hardware

Consider the trade-offs

When to look elsewhere

  • Anyone needing the clutch itself — this is felts only
  • Cymbal stand tilters or seat felts, which are a different size
  • Drummers with an unusual clutch design that takes proprietary parts

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Sound Percussion Labs SPC14 Hi-Hat Clutch Felts 4-Pack construction detail

Detail 01

4-pack

A standard clutch uses two felts, so one pack covers two changes or a spare set for a double-hat rig.

Detail 02

Felt, not rubber or plastic

Felt compresses under the top cymbal, which is what lets the hat breathe and stops metal-on-metal buzz.

Detail 03

Sold as parts, not a full clutch

You reuse your existing clutch body and wing nut — only the worn cushions get replaced.

Detail 04

Under $10

Cheap enough to keep a spare pack in the hardware bag rather than hunting one down before a show.

Final check

Know before you order

  1. 01Check your clutch's felt diameter and hole size before ordering — sizes vary by brand
  2. 02No clutch, rod, or wing nut included, just the felts
  3. 03Compressed felts look fine until removed; compare thickness against a new one
Sound Percussion Labs SPC14 Hi-Hat Clutch Felts 4-Pack close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01How many felts does one hi-hat clutch need?

Two — one above and one below the top cymbal. This four-pack gives you two full changes, or one change plus spares.

02Will these fit my clutch?

They fit standard hi-hat clutches. Measure the felt's outside diameter and center hole against your old ones if your hardware is unusual or vintage.

03Can I use these as cymbal stand felts?

Only if the size matches. Clutch felts are generally smaller than the felts used under a crash or ride on a stand.

04How do I know when to replace clutch felts?

When they're packed flat, torn, or the top hat rattles and won't sit level. Flattened felt loses the cushion that lets the cymbal move.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

5 detailsOther
Category Source
detail
Tier
new
Korena Special
false
Source Id
site51274115065152
Prop65
WARNING: This product can expose you to chemicals including 4,4'-Methylenedianiline, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov